Upload-From
Drive to Card
1.
Switch Off power
2.
Take out Interbus module and connect download tool
3.
Switch ON power
4.
Push Stop
5.
Push PRG (
i.e. Program)
6.
Push Left
Arrow- Display shows user menu
7.
Push Up
Arrow till display shows Load/Store
8.
Push Right
Arrow- Display shows code 0002 00 as 1
9.
Push Up Arrow key and go to parameter C0003 00
10.
Push PRG
to take cursor down
11.
Using Up Key make parameter C0003 00 as 11
(at the bottom of display it shows Save extern option)
12.
Push SHIFT+PRG
at the same time to start upload
13.
Download starts and display shows BUSY
14.
After upload finished Push PRG
15.
Push RUN
16.
Switch Off power and take out Download module and connect interbus
module
17.
Switch ON power