How to Download the Lenze Core and Infeed Drive Program of Reelstand of Regioman Press

Download:- From Card to Drive

1. Switch Off power
2. Take out interbus module and connect lenze card module
3. Switch ON power
4. It shows 0 at the start
5. Select number for particular drive by pressing T3 button on the card module
• 1-Core Drive 1
• 2-Core Drive 2
• 3-Infeed Drive

6        Yellow and Green LED glows-it means parameter set matches for that Drive

7        To start download program from card to drive-push T1 button and hold for 3 seconds

8        Display starts counting from 9 to 0

9        Push T1 again

10    LED starts blinking- it means download starts

11    After some time LED is idle-it means download finished

12    Switch Off power and take out Lenze card module and connect interbus module

13    Switch ON power

14    Check for the loaded set of parameters on the HMI. It should be as follows:

Core 1  – 131

Core 2  – 131

In feed – 121

Arm     –  311