Brief
Description
• INTERBUS local-bus
station
•
Diagnosis LEDs
• Outputs
for 4 synchronous motors 24 V / 5 W, electrical isolation from INTERBUS
•
Equipped with power-factor correction capacitors
• Status
LEDs for all outputs
• 4
analog inputs, 12 bit, connection of potentiometers
• ID
code: 127 dez / 7F hex
• Number
of data words: 4
The
following diagnosis LEDs serve to indicate the operating state of the INTERBUS at start-up
and error
diagnosis:
UL
UL LED
green
Monitoring
the +5 V supply voltage
CC
Cable
Check LED green
Monitoring
the remote-bus input cable:
The LED
is lit if the cable connection is O.K. and the INTERBUS master not
resetting.
In the case of an INTERBUS or
power-up reset the LED is inactive.
BA
Bus
Active LED green
Indicates
cyclic data transmission accross the INTERBUS signal lines.
E
Error LED
red
Monitoring
the micro-controller: The LED indicates that the micro-controller does not
operate duly.